ISO 9002 

Shanghai Fast-Fix Rivet Corp.
Manufacturer & Supplier Of Rivet In China

Main Products

　

　

T O P
 
P R O F I L E

S T A N D A R D

P R O D U C T S

S H O W  N E W S

 RIVET TECHNICAL 

C O N T A C T S

Blind Rivet
　 　
Drive Rivets

Structural Rivet

Blind Rivet Nuts

Hand Rivet Tool

Pneumatic Tool

Wire For Rivet

Note: 

1.)2.4mm,3.0mm,3.2mm,4.0mm,4.8mm,5.0mm,6.0mm,6.4mm rivets are available .

2.)Dome Head ,CSK head, Large Head blind rivet are available .      

3.)Rivet Dimension ,tolerance, tensile & shear strength, and more data, please Ref. Fast-fix rivet catalogue or drawings .

4.)We have different type hand riveting tool , please ref. Fast-Fix Rivet catalogue.
***************************************************************
What is blind rivet---an introduction

A blind rivet consists of two parts:-

  • the rivet body, also referred to as the rivet body
  • and within it, the setting device, the mandrel (sometimes called the nail or stem).

The rivet body is normally manufactured from one of three methods:-

  • from wire, the most common method

  • from tube, common in longer lengths, not normally as strong as wire drawn

  • from sheet, least popular and generally the weakest option.

Blind rivets are particularly used when access to the joint is only available from one side. The rivet is placed in a pre-drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. As the head of the mandrel reaches the face of the blind side material, the pulling force is resisted, and at a predetermined force, the mandrel will snap at the break point of the mandrel. A tight joint formed by the rivet body remains, the head of the mandrel remains encapsulated at the blind side, although variations of this are available, and the mandrel stem is ejected.

The process is rapid and simple. The setting force is determined by the product design of the rivet mandrel, where the break point is predetermined, with a whole range of tooling available to suit budgets, applications and environments.

　

　
　

　

 　

　

Address:No. 1151, Lian Xi Road,Shanghai,China 201204
Phone: 0086-(21)58912860 | Fax: 0086-(21)58912793 
E-mail:  sales@rivet-china.com

|Top |Profile |Standard |Products |Show News |Rivet Tech |Contacts |

All Copy Right Reserved By ShanghaiFast-fix Rivet Corp

　

　

　

　

　

　

　

　

　

　

　

　

Fast-Fix rivets include open type blind rivet, close-end type blind rivet, multi-grip type blind rivet,  grooved type blind rivet, peel type blind rivet, structure rivet, rivet nut , special type rivet etc. rivet specification according to IFI standard & Din standard & ISO standard .